The easiest method to Enable a web-based Interface round the ‘cisco’ Catalyst

‘cisco’ Catalyst switches include remote configuration selections for example connecting through telnet, SSH and web interface. If you’re configuring a ‘cisco’ Catalyst switch but they are uncomfortable while using the ‘cisco’ command line (CLI), enabling configuration access utilizing a internet browser could be a logic choice.

Things You Will Need

‘cisco’ Catalyst switch with telnet access enabled

Fortunate Professional mode password

Telnet access password

Ip within the ‘cisco’ Catalyst switch

Microsoft Home home home windows computer with Microsoft telnet client software installed

Instructions

  1. Click on the “Start” button, then click on the “Run” box (Home home home windows XP) or click on the “Search” box (Home home home windows 7 or Vista). Type “cmd” within the “Run” or “Search” box, then press the “Enter” key. The command line window look.
  1. Type “telnet x.x.x.x” and substitute the Ip within the ‘cisco’ Catalyst switch for the “x.x.x.x,” then press the “Enter” key.
  1. Type the password when requested allowing you to connect while using ‘cisco’ Catalyst.
  1. Type “enable” and press the “Enter” key. Type the Fortunate Professional password when requested, and press the “Enter” key.
  1. Type “config t” and press the “Enter” key.
  1. Type “ip http server” and press the “Enter” key.
  1. Type “finish” and press the “Enter” key.

More Related:

The easiest method to Configure a DHCP Relay round the ‘cisco’ Catalyst 4500 Switch

  1. Log for the ‘cisco’ device getting an interactive text-oriented communications facility employing a virtual terminal application, for example SSH or Telnet. Every time a login remains effective, a read-only command-line prompt seems, for example “Switch>.”
  1. Type the command “enable” inside the “Switch>” prompt. Type the password towards the switch. The command-line changes having a enabled prompt, for example “Switch#.”
  1. Type the command “config terminal” inside the “Switch#” prompt, and press the “Return” key. The “config terminal” command modifies the prompt to “Router (config) #.”
  1. Type the command “interface FastEthernet” inside the “Router(config)#” prompt, and press the “Return” key. This command modifies the prompt to “Router(config-if)#.”
  1. Type the command “ip assistant-address” inside the “Router(config-if)#” prompt. This command enables the forwarding of DHCP packets to a new subnet.
  1. Hold lower the “Control” and “Z” keys concurrently inside the “Router(config-if)#” prompt. This takes the router for the “Router#” prompt. The DHCP relay representative is becoming configured to help forwarding of DHCP packets.

Recommended For You

About the Author: admin

Leave a Reply

Your email address will not be published. Required fields are marked *